blog dot kam

Worked for me 100%, thanks a lot!

Tried this and it didn’t work for me. I had already installed the drivers off the Motorola site and downgraded the bootloader so didn’t need to do those steps.
Fails at the point where it brings up a dialog telling you to remove the cable from the phone, power on without the cable (doesn’t state here whether it should be restarted in normal mode or that funky # and * combination), wait until phone powers on, plug cable back in, wait for windows to detect and click on ok.
Upon clicking OK I get the following errors:
Connecting to phone …
ERROR: Could not connect
ERROR: Connect error

Downgrading bootloader… Success.
Sending Restart Command…
Waiting for driver to disconnect… Done!
Waiting for phone… Found!
Opening phone for communication… Success!
Getting bootloader version… 07.D0
Getting flash mode… SFLASH (Normal)
Sending ramldr… Success.
Jumping… ACK JUMP,03FD0010
Erasing…

^^ last thing i got then my phone shut off n will not power up,

most will happen is keypads light up

i even tried to flashtrap…. nothing

it’s really big thanks for staff here

Finally managed to sort it out. The drivers appeared to be all installed but just weren’t behaving themselves. The computer wasn’t detecting all the interfaces. Enter Motophoenix. I was starting to think that perhaps this phone was simple unlockable so decided to run a piece of proprietary software called Motophoenix.

It allows a free download to test whether the software will work with your phone. So I downloaded it and ran it. It has an option called “Check Unlock Possibility”. Start this and it starts scanning interfaces. First though open up device manager and you should have three items appearing under “motorola devices”. Once you have these appearing, click on the abort button on MotoPhoenix and then carry on - when you’re asked to power back up, run MotoPhoenix again and wait for the devices to show up, hit abort, and then go back to the p2k easy tool and click okay.

Hey Jim,

Most of GSM phones in US come locked to certain company - meaning that if today you have Cingular, for example, and tomorrow you would like to get T-Mobile, you would NOT be able to simply switch SIM cards from AT&T to T-Mobile, and make it work, because your phone is LOCKed to Cingular

That also creates a problem for traveling. If you go outside US, let’s say to Spain, and would like to buy a SIM card in Spain to use with your phone, you will NOT be able to do that, because your phone is LOCKed to US’s Cingular

Therefore I took time to go over the process of unlocking the phone (Motorola V3 RAZR, in this case), and shared my luck with everybody else, so they do not have to struggle.

Thanks for this ! Was working 100% for me too

Dear Jim,
I have an 0A.52 boot loader version,
And this tutorial it’s about 08.26!!

Have you the tutorial about 0A.52 boot loader version?

Thanks,

Julio Cesar

AWESOM ..TRIED EVERYTHING ..AND P2K made it real simple..THNAKS SO MUCH

You Sir are a steely eyed missile man and are to be congratulated on such a fine collection of tools and instructions. We are officially unlocked and flying free!!

Cheers!!!

after using the downgrader tool, now my phone does not have any boot loader, it indicated the below:
Bootloader version: 0000

How can i install any boot loader back to my phone? Please help!

I have 0A.28 version, how to downgrade it to 07.D0 ??? Please answer on my mail Krotysz@yahoo.com
Thanls

Hi… I’m stuck with Scotty downgrader…
My phone has 7.E0 boot loader (I understand it must be downgraded to 7.D0) and when I run downgrader tool I get this message: ‘No need to downgrade bootloader!’ Is this ok ?

Here’s the log:

C:\Documents and Settings\Administrator\Desktop\scotty>downgrader.exe
Waiting for phone… Found!

Getting phone interface information…
Registry Interface #: 3
Interface Description: Motorola Flash Interface
Interface LocInfo: S Flash Neptune LTE

Opening phone for communication… Success!
Getting software version… R374_G_0E.40.64R, Flex: GSMV3PERARLA088
Getting bootloader version… 07.E0
Getting flash mode… SFLASH (Normal)
No need to downgrade bootloader!
Press any key to exit…

it works very easy thanks guys

i have an OA.52. version and am not able 2 do anything a little help plz would be gratefully appreciated.

Thanks

dannywilson913@hotmail.co.uk

Help I can’t seem to get the p2k_easy_tool_v37 to work. When I download it and open it up all I get is my computer asking me what program to open it with.
Other then that everything else was working correctly.
Thank you

Hi,
I followed your steps and they worked great!!!

I found the driver for the v3razr at

http://www.driverguide.com

Its real important you have the driver installed first before you start everything.

I have searched everywhere how to unlock this phone and this has been reliable 100% all you have to is follow the directions

I unlocked my RazrV3 from Cingular and now can use the phone for my T-Mobile.

Thanks again

Rose

the phone is not being found help me please

awesome this really works! it was better than i hoped for!..i got a bit worried somewhere in the middle of downgrading…but it all turned out perfectly fine…

i did it all by myself..of course wiv the big help of YOU GUYS
now i feel clever:)

hi i really need help i downgraded my bootloader from 07.eo to 07.do but now my phone wont switch on the keypad just flashes and my computer is saying the it has malfunctioned so will not work properly sso the computer isnt picking up my phone what do i do?
lisaogden20@hotmail.com

Worked fine with me !! Have a couple of problems connecting with the downgrader, i’ve tried to start the downloader with the phone open normally, and windows calls for the remaining drivers, and the rest go very fine !! Thanks a lot guys !!

hi i downloaded the tools and unzipped them, connected the phone but windows did not ask me anything, what do i do?
thanx

Got Error 82. What now?

I did thsi but now my razr is really unstable and drops all kinds of calls, how can i upgrade to a new stock firmware?

followed all the steps. Everything seems ok accept for the fact that after the bootloader to 7.0 holding the # & * while trying to power up the phone does nothing but light up the keypad. I can turn the phone on regularly, but i cant use the unlocking tool if i cant get back to the bootloader screen, correct? Someone please help.

thanks mate.
it worked perfectly.

Is there an update on OA.52 yet

Your site found in Google: position728

OK, I’m trying to unlock my Razr. I started with a different, more complicated method. I flashed bootloader 7.D0 (succesfully) but now, when I try to go into bootloader mode, it won’t do it. Just turns back off. I can turn the phone on normally, but not in bootloader mode. I’ve tried putting 8.26 back on there (which loads successfully) but then, it still won’t go into bootloader mode. Help? Please?

good until communicating with phone then it acts uo maybe it doesnt work for all models of razr ex razr V3r V3xx etc dont knoe i guess thess phones require test point unlocking

btw i got error 82 10 is that bc it needs to unlock through testpoint

Your site found in Google: position938

I got the same error=
Critical error
82
10
How could I solve this problem. Please help me….

Thank You.. worked 100% after 3 days of trying everything… just let u people know it really only works on service pack 2.. and have the sim card at all times inside of the phone… peace out and thank you once again =o)

PLEASE HELP!!!!!!!!!!!!!!!!!!!!!

I got the same error=
Critical error
82
10
How could I solve this problem. Please help me….

worked 100% for me pal thanx, couldnt have done it without you know who . . . hehe THUMBS UP !!

i have this problem,, somebody can help me
Connecting to phone …
Connected to: ‘Motorola Flash’
Connected OK
Bootloader version: 07D0
Sending loader to phone …
Loader sent OK.
Get info from phone …
PDS info: PDS_4007
ADR info: 126E05A8
Powering down…
Connecting to phone …
Switching to P2K mode …
ERROR: Could not connect
ERROR: Connect error

Ok guys listen if you try and fails start over again and follow instractions
it litle hard but it WORKS and ou don’t need sim card to do’it
I try with two motorolas and worked like charm

P.S Thanks allot for the program

Tried to load the “P2K_Easy_Tool_v37″ file and my computer detected a virus warning. Since a lot of user have tried it, I don’t believe there is a virus. I selected the “ignor” option, but my system would not let me run it.

I also have the OA.51 loader. I tried to nlock it using another method from another site, but it gave me a “Critical Error 84″

I NEED THIS FOR 0A.52. IS THIS ALSO POSSIBLE
SW VERSION: R4515_g_08_BD.B3R

PLZ HELP ME I NEED THIS DAMN MUCH

Hi there, I have tried this and although p2k easy tools says unlocked! my phone still reguires the sim password when putting another sim card in to the phone. Perhaps, the password code has been changed on later phones?

Hi there, much egg on face! The sim card I was using has the password. Someone forgot to mention this. Hmmm…..

This procedure worked fine for, just took a bit of time to see it

Before I try this, I’d like to know this will work with the Motorola V3XX, please.
Thanks!
R

how in the world do you get past the last step. i read everyones comment but i get the same connect error after it tells you to disconnect the phone and then connect it back. it just won’t read the phone. i hate windows. i can’t get it to read. and the drivers i had for the phone is from another site. it won’t even take the drivers from this one. what to do.

Is there anyway that this could work on a razr v3xx?
If how could i unlock my phone?

i have this problem,, somebody can help me
Connecting to phone …
Connected to: ‘Motorola Flash’
Connected OK
Bootloader version: 07D0
Sending loader to phone …
Loader sent OK.
Get info from phone …
PDS info: PDS_4007
ADR info: 126E05A8
Powering down…
Connecting to phone …
Switching to P2K mode …
ERROR: Could not connect
ERROR: Connect error

Followed the instructions exactly as stated and now my V3 is free from Cingular’s evil clutches. Thanks for the info!

Presto-Changeo!

Worked great.

After downgrading to 07.D0, it seemed that the phone would not boot into the flash screen. No display. But then I noticed VERY faintly it showed 07.D0. The backlight wasn’t coming on for some reason.

Continued with the rest of the procedure. I had to restart the phone several times during p2k_easy_tool_v37 process, as instructed by the program. Drivers had to be loaded during this process. Eventually it successfully completed.

Thank you!
Thank you!

it works perfect for me
thanks for your post

hey i tryed to download the pk2 easy tools but when trying to run it my computor gives me an error message saying something about a debugger found? could this be because i use vista? also when opening the bootmenue on the phone mine already says 07.E0
SW Version

i belive this is because i have the first version of the razr. could somone help me out here? is there another program that might work with windows vista that i could use. i have the correct usb cable and my phone is already downgraded as i said before. any help would be extremly appriciated!!!!!!!!!!!!

the error in p2k easy tool is

Connecting to phone …
Connected to: ‘Motorola Flash’
Connected OK
Bootloader version: 07E0
Sending loader to phone …
Loader sent OK.
Get info from phone …
PDS info: PDS_4007
ADR info: 126E05A8
Powering down…
Connecting to phone …
ERROR: Could not connect
ERROR: Connect error

Does any one know where to get p2k easy tools v5.3? Thanks in advance!

My problem is I cannot get my RAZR to go into USB mode.I have a Cingular phone and when I go to \\TOOLS\CONNECTION\ menu only Bluetooth option is available. How can I get it to go into USB mode. I have the drivers installed on my PC (WIN XP SP2) but it will not detect the phone.

Thanks in advance

I JUST USED YOUR SSOFTWARE

WELL DONE
YOU JUST SAVED ME THE £15 THAT I WAS QUOTED TO UNLOCK MY V3

THANK YOU VERY MUCH !!!!!!

I had the same problem reported by Nevyn (read above). His recommendation using MotoPhoenix WORKED!!!! yippee. (bowing down).

MotoPhoenix appears to actually load the 3 USB interfaces (drivers) for Razr V3 when you click “check for unlocking”. You monitor when that happens by having the device driver view up - hitting “Abort” in Motophoenix at that point will still ensure that “P2k Easy Tool V3.7″ will be able to talk to the phone.

[…] Unlock Motorola V3 RAZR […]

I have problem with unlock.
It show on the screen is “Critical Error 82 10″
Can you help me plz…

How would you use p2k easy tools on vista?

Thanks! It’s helped.

thanks for your help me!

i finally got it to work! but my text messaging isn’t workin. can someone help with that?

Hi,
Would this work for Motorola V3 (not Razr) as well
Thanks,
Sanj

I was having a little trouble at first but I figured it all out! This is great! Worked perfectly fine for me… Thanks so much!

hello . this is a good ideea to slov my problem with v3, BUT , my boot loader sequens doesn t start . i installed a theme on my phone , and afreta second reboot the phone it no more starting, f i press the on/off key the light will apear for 2 sec and after …is dead … i don t have other ideea to solv my pb …only to take the phone in service , thing wich i hate …. so , can anybody know a method to start my boot loader wih phone switced off ?! plss

hello everything was going good and then it said
wait until phone powers on,
plug cable back in
wait for windows to detect and click on ok.
Upon clicking OK I get the following errors:
Connecting to phone …
ERROR: Could not connect
ERROR: Connect error

that when i finished using scotty and was a p2k_easy and like it came to 100% and it said those thing and then it wont work anymore screen everything come but phone isnt unlocked i try to turn off and hold * and # and power button that boot screen doesnt come can any 1 help me?

I just called ATT and they will provide the code within 10 days. They indicated that they need to contact the manufacturer and when they get the code they will give it to me free of charge

[…] a look at this: Unlock Motorola V3 RAZR and go to the Moon! __________________ There are no electronic faults. Only mechanical […]

AFTER THAT…

I TRIED TO OPEN file ” scotty2_8.26_downgrader_v2 ”

- clicked “downgrader”

but my phone not responding !

i am getting message like this …check below

Waiting for phone… GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.
GetPhoneStatus - unable to find any valid interfaces.

i tried this on “Motorola V3 RAZR” not working !!

Is tehre anyway to unlock a motorola razr v3 without doing test point?

tenixo@hotmail.com

Worked great for me…thanks a bunch! I did have a bit of an issue but following what Prakar sugguested fixed the issue. Now it’s unlocked!

That’s sick. Much love for all the smart people out there, who make it possible for the dummies like us to do these things. I can’t thank you people enough.

100% woring thank u love ur work men any more use tools to unlck other phones or any ligit codes

Great Stuff - Works 100%

Works in Denmark !
Thanks very much.
Did have a hard time getting the * and # buttons powerup function to work, but after a few tries - it worked !

“p2k drivers 2.9″ and “P2K_Easy_Tool_v37″ doesn’t work after I download it? I need help on this…can somebody email me the working software?

After i posted my message, i started fiddling around a little bit. Found: windows didn’t locate the drivers correctly & i had to ‘help’ it 3 times to do it properly. Went through ‘control panel’ to listing of hardware connected, then clicked on motorola device and reinstalled the drivers over and over until windows indicated ‘the {motorola} device is working properly. Eventually the unlocking procedure started - I had to disconnect it and power it up 2 times, but now I’m using my phone with a Canadian carrier!
Thanks for your instructions (all of you that helped me figuring out, considering it didn’t work rightaway - i had some scary moments!)

My original bootloader was 0C.C1
SW Version R3442A-G-0E.43.08R
Go to USB mode OK, PC recognize the V3 but cannot downgrade it to 7.D0
Same problem as Jery posting on Dec 21st 2007
Please help to unlock my V3 ! ! !

Has anyone received instructions on how to deal with a critical error 82 10? please contact me phgibney@aol.com.

i have a bootloader 0A.52.
Connecting to phone …
Connected to: ‘Motorola Flash’
Connected OK
Bootloader version: 0A52
ERROR: Please make TESTPOINT on phone for this model!

please help!!

Bang on! Saw this after crawling through other sites which had either sketchy or partial instructions. I too had to reload the motorola drivers several times throughout. After downgrading the Boot Loader, was not able to see the new version on the flash screen (keys would light up but nothing on the screen). But my pc recognized the phone when I plugged it in to complete the final unlock step.

Thanks!

Has anyone found a solution to this yet:

I have the exact same problem as vtec92civic

At the end of Step 5 it says:
“Bootloader is now 7.D0, have fun modding!”
all seems to be going as planned.

but when I turn it back on (Step 6)but when I turn the phone back on holding the # and *, the keypad lights up for 1 sec and stops and nothing happens, no longer able to get into “the flash screen”

thanks, Michael echofilmlycos.com

vtec92civic Says:
July 29th, 2007 at 5:40:41

followed all the steps. Everything seems ok accept for the fact that after the bootloader to 7.0 holding the # & * while trying to power up the phone does nothing but light up the keypad. I can turn the phone on regularly, but i cant use the unlocking tool if i cant get back to the bootloader screen, correct? Someone please help.

This behaviour occurs to some phones, don’t bother about it, if you press #* on the boot it will be in the boot loader menu although no video are posted to the screen, so power up your phone with this keys pressed and then make p2k easy tools unlock.

it keeps failing to send loader to the phone while using the unlocker. it regonizes it and starts to send loader then say error: recieving ready, error: send loader failed (2) could some one please shed some light on this please. thanks

ok I clicked the downgrader.exe sims to work but I’m stocked at Saving CG1 backup…83% since 15 minutes now.
Anyone know how long it will take?

solution for all vista users: go back to XP…..

I have a 03.08 Bootloader will all this work in my phone
razr v3xx
carrier cingular or att
sw version
r26111 mld-as_u_96.b0.0ar
thank you in advance

Worked great for me too, my V3 is from Movistar, Peru. One question though, after unlocking the phone, would it be better to upgrade the bootloader to the latest version again? I believe that P2K Easy Tool allows to do so in the Repair tab, the “Write Bootloader” option. I guess the file to use would be the 826ramldr.bin that came in the downgrader zip? What is the disadvantage (if any) to have an older bootloader version?
Many many thanks for such great piece of software!

i can`t run the p2k drivers 2.9, can u help me please

I have a question. I did everything mentioned above. NOW, here lies my question. I did everything, and everything came out like it’s written and pictured, on this page; but if I power on my phone now, it just takes a simple tap of the power button. Not the holding down for 2 seconds like it used to, and I have no bootloader logo, if i press * and # at the same time. After holding down * and # it won’t power up, UNLESS, I “just tap the power button, by itself”. Does this mean I need to flash it, orrrr is it ready to be used for Cingular and other providers? Do I need to do some playing with the tools provided? Am I good to go, or do I need flashes? Someone please, let me know. Thanks Sooooo much.

hi there,
I was just followed the instruction and here I am on the Moon.
I was very nervous while looking at the message on DOS screen and P2K easy tool but it was working very well.

I had to turn on my mobile as instruction says during scotty2 process but no problem.

Big thanks for this great information and programs.
It worked perfect with my Razr V3 (Originally 8.26)
I still cannot believe I did it by myself.

Unlocked network: Optus (Australia) - See ya!

hello i have a motorola slva l9 and i would like to unlock it can u tell me how can i please.

Hey! Just got done using this…works great, had to run the unlock twice…but no bigie! Thanks a million!! For anyone interested this is a very easy to use product which works much better if you download tugzip.

Works like a charm…

Thanks for the post, saved me $25

Carsten, Denmark

When u finish with the P2K_Easy_Tool_v37 and u see the ADR info the it says powering down and a window appears that says to power the phone up again and wait until it is detected by windows. Before u click OK on that window do the following: got to control panel and click “add hardware” follow the procedure and when it come to ask for driver choose to select your hardware from list. Navigate down until u see Motorola USB modem.Select it and finish the process. Now u can click OK on the P2K_Easy_Tool_v37 window to unlock the phone.At the end u will see unlock OK powering down.By this way u force windows to reload the driver. I have completed the procedure with the P2K_Easy_Tool_v37 twice succesfully but when I insert my 3 sim card I see the message “check sim”.I realise that the phone is stil locked although the P2K_Easy_Tool_v37 says unlock OK.Any help will be much appreciated.Thanks

i have a bootloader 0A.30.
Connecting to phone …
Connected to: ‘Motorola Flash’
Connected OK
Bootloader version: 0A30
ERROR: Please make TESTPOINT on phone for this model!

please help!!

I want to unlock my Motorola V3 RAZAR with Telstra in Australia. Can it be done with the 7 steps?
What is the worst it can happen? eg. damage the phone? damage the existing sim card? The phone or sim card un-usable?

i got the stuff you said but i cant put it in the phone i can take stuff out like pictures but i cant put anything in it

How do I get from a 0C.C1 to the 07.D0.
on my Motorolla Razr V3? use the same software?
I want ti change the V3 from T mo to Cing..
thanks

One other thing…how can I get the computer to once again recognize the phone when plugged into usb?

This program worked great to unlock my newly bought Cingular RAZR misrepresented on Ebay for use on T Mobile.

Thanks.

Thank you so much for this software. Ever since I used it, it worked on the first try and I was able to unlock the phone as well as reset my security code because the person I bought my razor phone couldn’t remember what it was.

i’m stuck on
waiting for phone ….

how long does it normally take?

went i open the downgrader in my cellphone say critical error 82/10 what does it mean someone help me please!!! david_munoz123@hotmail.com

I did not have to downgrade my bootloader
The unlock tool works great
My friend is happily using his RAZR now.

It worked for me 100%! Thank you very much! Will this also work on other motorola models?

I got same thing that raph got. I cannot get the bootloader information again. Can we do anything eles??
Thanks.

THANK YOU SO MUCH! Everything worked fine for me. I have a bit of problem when trying to run the P2K Easy Tool since I wasn’t getting connected but then I changed the phone to another USB port on the PC it asked for the drivers and that solve the problem! SUCK ON THAT DIGITEL!!!

How can i upgrade the phone again? Anyone help pls.
thankx